Page

Page=	Reference	Title	Subject (A-Z)<= /p>	N.
4-17	Casting Plant 2/2007	Influence of iron and manganese on porosity formation in Al Si cast alloys	Al Si cast alloys	1
36-39	Indian N.1 2007	Effect of reinforcements on the mechanical properties of aged AL(7075) based hybrid composites	Al (7075)	2
34-37	Casting P.T N.1 2007	NDCS- a new process for manufacturing AL automotive castings	AL automotive castings=	3
298-301	F.T.J. Oct.2007	HIPing – a potent post casting treatment for high integrity aluminium cast= ings	Aluminium castings	4
34-44	Indian F. N.5 2007	Emergence of aluminum alloyed cast ir= ons as heat- resistant materials	Aluminum	5
33-41	Indian N.2 2007	Processing' properties and metallographic studies of combined tungsten carbide and aluminium silicate particulate reinforced aluminium-11.8% silicon alloy matrix hybrid composite castings	Aluminum	6
52-54	Die casting En. March 2007	Die casting and squeeze casting of ULTALITE aluminum metal matrix composites<= o:p>	Aluminum	7
25-29=	Inter. Cast metals= 2007/1	Guidelines f= or designing metal casting research: application to aluminium alloy castings=	Aluminum all= oy castings	8
28-31=	Modern C. 2007/Aug.	Improve your vacuum test : the result of a vacuum test for aluminum melt quality are o= nly as good as the accuracy of the test	Aluminum mel= ting	9
28-31=	Modern C. 2007/Aug	Improve your vacuum test : the result of a vacuum test for aluminum melt quality are o= nly as good as the accuracy of the test itself	Aluminum mel= ting	10
36-43	Die casting En.Jan. 2007	Cost – effective product launch through optimized design utilizing finite element analysis simulation	Analysis simulation	11
34-37	Casting Plant 2/2007	New generation of boron nitride=	Boron nitride	12
48-51	Casting P N.2/ 2006	Automated inspection of ventilation slots in cast brake disks	Brake disks	13
2-7	Casting plant 3/2007	High density shavings briquettes for iron foundries	Briquettes	14
30-40	Inter. Cast metals= 2007/1	Effects of nodularity on thermal conductivity of cast iron	Cast iron	15
44-48	Casting plant 2/2007	Final decoring , cleaning and discharging of metal chips at engine parts	Cleaning	16
27-35	Indian N.1 2007	Compacted graphite cast iron – An ideal material for automobile application	Compacted graphite cast iron	17
33-41	Indian N.2 2007	Processing' properties and metallographic studies of combined tungsten carbide and aluminium silicate particulate reinforced aluminium-11.8% silicon alloy matrix hybrid composite castings	Composite	18
36-39	Indian N.1 2007	Effect of reinforcements on the mechanical properties of aged AL(7075) based hybrid composites=	Composite	19
8-14	Casting plant 3/2007	New moulding sand additive impr= oves casting surfaces	Coremaking	20
29-32	Indian N.2 2007	Corrosion behaviors of different types of cast irons in aqueous marine environment<= o:p>	Corrosion	21
40-42	Die casting En. March 2007	Corrosion protection of zinc surfaces by chromium(VI)-free products A comparison of several products	Corrosion protection	22
59-60	Die casting En.Jan. 2007	New K-Alloy offers: corrosion resistant die casting alloy	Corrosion resistant	23
54-65	Casting plant 2/2007	Cost effective process control in foundries	Cost effective	24
18-23	Casting Plant 2/2007	Optimising plant availability in cupola furnace melting shops	Cupola furnace	25
14-23	Casting P.T N.1 2007	10 t/h cupolas for long – term operation	cupolas	26
38-45=	Casting P.T N.1 2007	Chip less cutting of aluminium and magnesium die casting parts	Cutting	27
189-191	F.T.J.2007/J= une	Innovations = in machine learning and defect diagnostics	Defect	28
47	Indian F. N.5 2007	Reduction of metal penetration defects in castings	Defects	29
22-27	Casting P N.2/ 2006	Economic production of ductile and weld able aluminium die casting	Die casting	30
28-33	Casting P N.2/ 2006	Multi step vacuum process optimizes die casting	Die casting	31
44-52	Casting plant 3/2007	Two for one transferring proven filling characteristics from a single to a two cavity die casting die	Die casting	32
30-31	Die casting En. March 2007	Progress on development of thin-section zinc die casting	Die casting	33
44-46	Die casting En. March 2007	Why and how using zinc alloys?:<= /p>	Die casting	34
48-51	Die casting En. March 2007	The hidden costs of deficient die	Die casting	35
52-54	Die casting En. March 2007	Die casting and squeeze casting of ULTALITE aluminum metal matrix composites<= o:p>	Die casting	36
44-48	Die casting En.Jannuary 2007	Computer simulation of high pressure die casting of a magnesium engine cradle=	Die casting	37
40-43=	Die C.Eng.2007/July	Die lubrican= ts / plunger tips: Better interaction –Key to better die casting<= span style=3D'font-size:10.0pt;mso-bidi-language:FA'>	Die casting<= /span>	38
44-46=	Die C.Eng.2007/July	Die lubrican= ts / plunger tips: External cooling water additives for cycle-up in die castin= g	Die casting<= /span>	39
48-53	Die C.Eng.2007/July	Die lubrican= ts / plunger tips: Heat treatment of large die casting tools characteristics a= nd properties	Die casting<= /span>	40
36-40	Die.C.E.2007= /Sep	Understandin= g residual stress effects and corr= ective action for die casting tools – part1	Die casting<= /span>	41
59-60	Die casting En.Jannuary 2007	New K-Alloy offers: corrosion resistant die casting alloy	Die casting alloy	42
24-33	Casting P.T N.1 2007	Prediction of distortion in thin-walled die castings	Die castings	43
40-43	Die C.Eng.2007/July	Die lubrican= ts / plunger tips: Better interaction –Key to better die casting<= span style=3D'font-size:10.0pt;mso-bidi-language:FA'>	Die lubrican= ts	44
44-46	Die C.Eng.2007/July	Die lubrican= ts / plunger tips: External cooling water additives for cycle-up in die castin= g	Die lubrican= ts	45
48-53=	Die C.Eng.2007/July	Die lubrican= ts / plunger tips: Heat treatment of large die casting tools characteristics a= nd properties	Die lubrican= ts	46
34-37	Casting P N.2/ 2006	Direct pouring for more economic casting production	Direct pouring	47
22-24	Die casting En.Jannuary 2007	Extracting meaningful dimensional data from casting distortion analysis	Distortion analysis	48
30- 31	Modern/ may 2007	Reducing pinhole porosity : Adjusting the treatment alloy used with ductile iron c= an impact the incidence of pinhole defects and lower the operating costs of = the metalcaster	Ductile iron	49
33-34=	Modern C. 2007/Aug.	Testing duct= ile iron nodularity	Ductile iron=	50
16-21	Casting plant 3/2007	Optimizing energy efficiency affilips counts on parallel difference power control	Energy	51
282-283	F.T.J. Oct.2007	Reducing energy use through simulation	Energy	52
284	F.T.J. Oct.2007	Redirecting waste heat to best advantage	Energy	53
285	F.T.J. Oct.2007	Best practice for maintaining good power quality	Energy	54
46-52	Indian N.1 2007	Use of gas in the foundry sector	Energy	55
42-44	Indian N.2 2007	Energy conservation in foundry industry	Energy conservation	56
27-30=	Indian F. 20= 07/8	Energy conservation options among Indian foundries: A broad overview	Energy conservation=	57
31-35=	Indian F. 20= 07/8	Energy conservation in Indian foundries: planning and methodologies	Energy conservation=	58
36-40=	Indian F. 20= 07/8	Energy effic= iency initiatives in Indian ferrous foundry sector	Energy effic= iency	59
41-42=	Indian F. 20= 07/8	Energy manag= ement in foundry with special reference to cupola based gray iron foundry	Energy management	60
29-32	Indian N.2 2007	Corrosion behavior of different types of cast irons in aqueous marine environment	Environment	61
43-49	Indian F. 20= 07/8	Improving environment – role of foundry industries in west Bengal	Environment<= /span>	62
45-46	Indian F. N.5 2007	Failure analysis of a knuckle casting	Failure analysis	63
4-12	Casting P N.2/ 2006	Further evaluation of a high performance continuous melting and holding crucible furnace system	Furnace	64
33-37	Modern/ may 2007	Nemak accelerates on the global track : you don't become the world's largest producer of engine castings without a handle on the most up to date technolog= y , but how it’s managed is equally critical	Global track	65
184-188=	F.T.J.2007/J= une	The signific= ance of total carbon in green sand systems	Green sand	66
1-13	Inter. Ca= st metals 2007/1	Linear and non-linear statistical modeling of green sand mould system	Green sand m= ould	67
34-44	Indian F. N.5 2007	Emergence of al= uminium alloyed cast irons as heat- resistant materials	Heat- resistant materials	68
48-53=	Die C.Eng.20= 07/July	Die treatmen= t of large die casting tools characteristics and properties lubricants / plung= er tips: Heat	Heat treatme= nt	69
44-47	Casting P N.2/ 2006	Removal of residual core sand and cleaning of castings by high pressure water jet= s	High pressure water jets	70
40-42	Casting plant 2/2007	Image analysis system controls de-palletizing of ingots	Image analysis system	71
18-21	Die casting En.Jannuary 2007	State of the industry	Industry	72
18-22	Die.C.E.2007= /Sep	Injection molding of thin –= ; wall components from magnesium alloys	Injection mo= lding	73
40-45	Indian N.1 2007	An innovative approach into the production of the traditional investment cas= ting process of India=	Investment casting	74
14-24=	Inter. Cast metals 2007/1=	Fracture tou= ghness of ceramic moulds for investment casting with ice patterns	Investment c= asting	75
46-50	Casting P.T N.1 2007	Shotblast systems for the surface treatment of light alloy castings	light alloy castings	76
12-16=	Die.C.E.2007= /Sep	Magnesium die casting: lubrication technology and trends	lubrication = technology	77
56-58	Die casting En.Jannuary 2007	Heavy duty magnesium	Magnesium	78
18-22=	Die.C.E.2007= /Sep	Injection mo= lding of thin – wall components from magnesium alloys	Magnesium al= loys	79
28-30=	Die.C.E.2007= /Sep	New developm= ents of magnesium alloy thixomolding technology	Magnesium alloys	80
12-16=	Die.C.E.2007= /Sep.	Magnesium die casting: lubrication technology and trends	Magnesium die casting=	81
24-27=	Die.C.E.2007= /Sep	The use of friction stir technology to modify the surfaces of AM60B mag= nesium die castings=	Magnesium die casting=	82
32-35=	Die.C.E.2007= /Sep	Properties o= f die casting alloys and a comparison of hot and cold chamber processes for magnesium die casting	Magnesium die casting=	83
38-42	Modern may/2007	Marking global resources: Sourcing castings	Marking	84
4-12	Casting P N.2/ 2006	Further evaluation of a high perfor= mance continuous melting and holding crucible furnace system<= /p>	Melting	85
16-21	Casting plant 3/2007	Optimizing energy efficiency affilips counts on parallel difference power control	Melting	86
22-26	Casting plant 3/2007	Automated metal treatment with chemic= al products	Melting	87
3-9	Casting P.T N.1 2007	Properties of new Mg alloy MRI-3 for designing components submitted to special event= s, misuse and cyclic loading	Mg alloy MRI-3	88
13-15	Casting P N.2/ 2006	Molding sand in best shape: with EIRICH technology you have a firm grip on your molding sand quality and costs	Molding sand	89
30-40=	Inter. Cast metals= 2007/1	Effects of nodularity on thermal conductivity of cast iron	Nodularity	90
33-34=	Modern C. 2007/Aug.	Testing ductile iron nodularity	Nodularity	91
40-43=	Die C.Eng.2007/July	Die lubrican= ts / plunger tips: Better interaction –Key to better die casting<= span style=3D'font-size:10.0pt;mso-bidi-language:FA'>	Plunger tips=	92
24-32	Casting Plant 2/2007	Reduced pressure casting and the effect of pressure on the part quality	Pressure casting	93
28-29	Casting plant 3/2007	New concept for manufacturing engine blocks by die casting<= /p>	Pressure die casting	94
30-39	Casting plant 3/2007	Manufacture of copper rotors by high pressure die casting	Pressure die casting	95
54-56	Casting plant 3/2007	Improved manufacture of pressure die casting by sensors in the die	Pressure die casting	96
50-52	Casting plant 2/2007	Acoustic resonance analysis for crack and structure testing in serial production	Quality assurance	97
44-47	Casting P N.2/ 2006	Removal of residual core sand and cleaning of castings by high pressure water jet= s	Residual core sand	98
40-42	Casting plant 3/2007	Application and benefits of state of the art riser technology	Riser technology	99
8-14	Casting plant 3/2007	New moulding sand additive impr= oves casting surfaces	Sand additive	100
38-43	Casting P N.2/ 2006	Production of sand casting moulds on the digital printing principle: A technological leap in rapid prototyping / manufacturing	Sand casting	101
29-33	Indian F. N.5 2007	Study of temper= ature distribution and movement of solidification front of casting in sand mould by modeling= and computer simulation	Sand mould	102
10-13	Casting P.T N.1 2007	Mechanical sand reclamation: components and characteristics	Sand reclamation	103
46-50	Casting P.T N.1 2007	Shotblast systems for the surface treatment of light alloy castings	Shotblast systems	104
29-33	Indian F. N.5 2007	Study of temperature distribution and movement of solidification front of casti= ng in sand mould by modeling and computer simulation	Simulation	105
44-52	Casting plant 3/2007	Two for one transferring proven filling characteristics from a single to a two cavity die casting die	Simulation	106
282-283	F.T.J. Oct.2007	Reducing energy use through simulation	Simulation	107
286-287	F.T.J. Oct.2007	Stress simulation offers numerous advantages	Simulation	108
294297	F.T.J. Oct.2007	Using stress simulation to tackle distortion and cracking in castings	Simulation	109
44-48	Die casting En.Jannuary 2007	Computer simulation of high pressure die casting of a magnesium engine cradle=	Simulation	110
50-54	Die casting En.Jannuary 2007	Simulation tools & integrated numerical optimization code	Simulation	111
	Die casting En.Jan.007	Simulation tools & integrated numerical optimization code	Simulation	112
56-60	Die casting En. March 2007	Metallographic verification of the model of the flow enforced during solidification under high external pressure	Solidification	113
52-54	Die casting En. March 2007	Die casting and squeeze casting of ULTALITE aluminum metal matrix composites<= o:p>	Squeeze casting	114
46-50	Casting P.T N.1 2007	Shot blast systems for the surface treatment of light alloy castings	Surface treatment	115
29-33	Indian F. N.5 2007	Study of temper= ature distribution and movement of solidification front of casting in sand moul= d by modeling and computer simulation	Temperature distribution	116
24-33	Casting P.T N.1 2007	Prediction of distortion in thin-walled die castings	Thin-walled	117
28-31	Modern C. 2007/Aug	Improve your vacuum test : the result of a vacuum test for aluminum melt quality are o= nly as good as the accuracy of the test itself	Vacuum test<= /span>	118
66-68	Casting plant 2/2007	Economic treatment of foundry waste waters	Waste waters	119
30-34	Modern C. June/2007	Welding ductile iron to steel: A new welding process will allow ductile iron cast= ings to be welded to steel, making fabrications using both metals a reality	Welding	120
32-34	Die casting En.Jan. 2007	Reinventing the wheel	Wheel	121
30-31	Die casting En. March 200	Progress on development of thin-section zinc die casting	Zinc	122
48-51	Die casting En. March 2007	The hidden costs of deficient die manufacturing in zinc die casting	Zinc	123
44-46	Die casting En. March 200	Why and how using zinc alloys?: positioning zinc alloys in the die casting ma= rket	Zinc alloys	124
32-34	Die casting En. March 2007	A basic understanding of the EU directives and how they affect North Americ= an zinc die casters	zinc die casters	125
42-46	Die.C.E.2007= /Sep	Challenge to= ultra thin wall zinc die casting under 0.5 mm thickness	Zinc die cas= ting	126
36-38	Die casting En. March 2007	A performance evaluation of modern surface finishes for zinc die casting – A summary	Zinc die castings	127